
A Charming Amigurumi Project for Gifts and Decoration
This tiger amigurumi brings together several crocheted pieces, including the arms, legs, muzzle, ears, collar, and tail, finished with embroidered facial features and distinctive tiger stripes. The little Christmas tree decorating its sweater adds a festive detail that makes this handmade character perfect for holiday displays, thoughtful gifts, winter crochet projects, or an amigurumi animal collection.
FREE TIGER CUB AMIGURUMI CROCHET PATTERN
Designer: Yulia Ladygina
Instagram: @ly_toys_
Materials
The original design uses the following materials:
- Orange yarn for the tiger’s main body.
- Dark brown yarn for the embroidered stripes and facial details.
- Cream yarn for the sweater and collar.
- Burgundy yarn for the shoes.
- White yarn for the muzzle.
- Green yarn for the Christmas tree decoration.
- Thin white and black thread for the embroidered details.
- Fiberfill stuffing.
- Two 8 mm safety eyes.
- A 2 mm crochet hook.
- Scissors.
- A yarn needle for sewing.
- Wire for the tail and arms.
- Adhesive medical tape for covering the wire ends.
- A small red bead or similar decorative detail for the top of the Christmas tree.
Yarn listed in the original design:
- YarnArt Jeans No. 23 — orange.
- YarnArt Jeans No. 70 — dark brown.
- Alize Cotton Gold Tweed No. 62 — cream.
- YarnArt Jeans No. 66 — burgundy.
- YarnArt Jeans No. 01 — white.
- YarnArt Jeans No. 52 — green.
The original source does not specify yarn quantities.
Crochet Abbreviations
The original pattern uses these abbreviations:
- MR: Magic ring
- ch: Chain
- sc: Single crochet
- inc: Increase, working two single crochet stitches into one stitch
- dec: Decrease, working two stitches together
- BLO: Back loop only
- FLO: Front loop only
- st(s): Stitch(es)
- (…) × n: Repeat the instructions in parentheses the specified number of times
Finished Size
The completed tiger measures approximately 16 cm (6.3 inches) when made using the specified materials.
Important Pattern Notes
Before beginning, review the designer’s construction notes:
- The original source does not specify whether the circular sections are worked in joined or continuous rounds.
- The tail and upper arms are not stuffed.
- Wire is used inside the tail and arms. The wire ends must be bent inward and covered with adhesive medical tape as directed by the designer.
- The lower feet are positioned slightly turned toward each other.
- The muzzle is lightly stuffed during assembly.
Use the original instructions for the precise stitch counts, round-by-round construction, and placement of the individual pieces.
1. Crochet the Tiger’s Tail
The tail is a long, narrow piece worked in orange yarn. It gives the finished tiger its recognizable silhouette and is attached to the lower part of the body during assembly.
The original design uses wire inside the tail to help it hold its shape. The tail is left unstuffed, and its opening is flattened before being secured.
Tail
With orange yarn. Do not stuff.
Round 1: 6 sc in MR (6)
Round 2: (sc, inc) x3 (9)
Rounds 3–24: 9 sc (9)
Prepare a wire piece the same length as the finished tail. Bend both ends inward and cover them with adhesive tape. See Photo 1.
Insert the wire into the tail. See Photo 2.
Flatten the opening and work 4 sc through both sides.
Fasten off and cut the yarn.
Upper Arms — Make 2
Do not stuff. Begin with orange yarn.
Round 1: 6 sc in MR (6)
Round 2: (sc, inc) x3 (9)
Rounds 3–4: 9 sc (9)
Change to cream yarn. Fasten off and cut the orange yarn.
Round 5: 9 sc in BLO (9)
Rounds 6–16: 9 sc (9)
Fasten off and cut the yarn. See Photo 3.
Make the second arm the same way.
Attach cream yarn to the unused front loops of Round 4 and work 9 sc around. See Photo 4.
Fasten off and cut the yarn. See Photo 5.
Lower Legs — Make 2
Begin with burgundy yarn.
Round 1: 6 sc in MR (6)
Round 2: inc x6 (12)
Round 3: (sc, inc) x6 (18)
Rounds 4–6: 18 sc (18)
Round 7: 5 sc, dec x4, 5 sc (14)
Round 8: 5 sc, dec x2, 5 sc (12)
Round 9: 4 sc, dec x2, 4 sc (10)
Change to orange yarn, but do not cut the burgundy yarn.
Round 10: 10 sc in BLO (10)
Rounds 11–15: 10 sc (10)
Work 5 additional sc so the marker sits on the inner side of the leg.
Fasten off and cut the orange yarn for the first leg. Stuff the leg.
For the boot edge, hold the foot facing you. Using the burgundy yarn left from Round 9, attach to the unused front loops of Round 9 and work 10 sc around.
Fasten off and cut the yarn.
Embroider the shoelaces with thin white thread as shown in Photo 6.
Make the second leg the same way, but do not cut the orange yarn after Round 15.
Body
Continue with orange yarn from the second leg.
Round 16: 5 sc, ch 6, work 10 sc around the first leg, 6 sc along the ch-6 bridge, 5 sc around the second leg (32)
Round 17: (7 sc, inc) x4 (36)
The designer positions the feet slightly turned toward each other.
Round 18: (8 sc, inc) x4 (40)
Round 19: (4 sc, inc) x8 (48)
Rounds 20–21: 48 sc (48)
Round 22: 2 sc, work 4 sc through the body stitches together with the 4 flattened tail stitches, 42 sc (48). See Photo 7.
Change to cream yarn. Fasten off and cut the orange yarn.
Round 23: 48 sc (48)
Round 24: 48 sc in BLO (48). See Photo 8.

Rounds 25–28: 48 sc (48)
Begin stuffing the body.
Round 29: (6 sc, dec) x6 (42)
Round 30: (5 sc, dec) x6 (36)
Rounds 31–32: 36 sc (36)
Round 33: (4 sc, dec) x6 (30)
Round 34: 30 sc (30)
Round 35: (3 sc, dec) x6 (24)
Round 36: 7 sc, work 5 sc through the next 5 body sts together with 5 sts of the left arm, 6 sc, work 5 sc through the next 5 body sts together with 5 sts of the right arm, 1 sc (24)
Round 37: 7 sc, work 4 sc through the next 4 body sts together with the remaining 4 sts of the left arm, 6 sc, work 4 sc through the next 4 body sts together with the remaining 4 sts of the right arm, 1 sc (22). See Photo 9.
Round 38: 2 sc, (dec, 4 sc) x3, dec (18). See Photo 10.
Change to orange yarn. Fasten off and cut the cream yarn.
Rounds 39–40: 18 sc (18)
Fasten off and cut the yarn.
Cut a piece of wire approximately 25 cm long. Bend both ends inward and cover them with adhesive tape. See Photo 11.
Insert the wire through the body and into both arms as shown in Photo 12.
Finish stuffing the body. See Photo 13.
Sweater Edge
With cream yarn, attach to the front half-loops of Body Round 22 and work 48 sc around, holding the hook as shown in Photo 14.
Fasten off and cut the yarn. See Photo 15.
Head
With orange yarn.
Round 1: 6 sc in MR (6)
Round 2: inc x6 (12)
Round 3: (sc, inc) x6 (18)
Round 4: (2 sc, inc) x6 (24)
Round 5: (3 sc, inc) x6 (30)
Round 6: (4 sc, inc) x6 (36)
Round 7: (5 sc, inc) x6 (42)
Rounds 8–9: 42 sc (42)
Round 10: inc x6, 6 sc, inc x6, 24 sc (54)
Rounds 11–16: 54 sc (54)
Round 17: (2 sc, dec) x3, 6 sc, (dec, 2 sc) x3, 24 sc (48)
Round 18: (dec, sc) x3, 6 sc, (sc, dec) x3, 24 sc (42)
Round 19: (5 sc, dec) x6 (36)
Round 20: (4 sc, dec) x6 (30)
Round 21: (3 sc, dec) x6 (24)
Round 22: (2 sc, dec) x6 (18)
Stuff the head firmly.
Fasten off, leaving a long tail for sewing. See Photo 16.

Ears — Make 2
Work back and forth in Rows. Do not pull the MR closed; ch 1 and turn the work as instructed.
Begin with orange yarn.
Row 1: 6 sc in MR (6)
Row 2: Ch 1, 6 sc (6)
Row 3: Ch 1, inc x6 (12)
Change to dark brown yarn. Leave a sufficiently long orange yarn tail for sewing the ear.
Row 4: Ch 1, 12 sc (12)
Fasten off, leaving a long tail for sewing.
Make the second ear the same way. See Photo 17.
Muzzle
With white yarn.
Round 1: Ch 9. Starting in the 2nd ch from the hook, work 3 sc in the same ch, 6 sc, 3 sc in the last ch; continue along the opposite side of the foundation chain and work 6 sc (18)
Round 2: inc, sc, inc, 6 sc, inc, sc, inc, 6 sc (22)
Round 3: inc x2, sc, inc x2, 6 sc, inc x2, sc, inc x2, 6 sc (30)
Rounds 4–6: 30 sc (30)
Fasten off, leaving a long tail for sewing. See Photo 18.
Collar
With cream yarn. Work back and forth in Rows.
Row 1: Ch 8. Starting in the 2nd ch from the hook, 7 sc (7)
Row 2: 7 sc in BLO, turn, ch 1 (7)
Rows 3–26: Repeat Row 2 (7)
Fasten off, leaving a tail for sewing the collar.
Assembly
- Sew the head to the body, catching one stitch loop from below and the stitch loop directly above it on the head. See Photos 19–20.
- Sew the muzzle to the head. Position the upper edge between Head Rounds 10–11 and the lower edge between Rounds 16–17. Lightly stuff the muzzle while sewing; the designer notes that this allows a small shaping pull afterward. See Photo 21.
- Insert and glue the eyes between Head Rounds 10–11 with 4 stitches between them along Round 10. With thin white thread, embroider the eye whites; with thin black thread, embroider the small arrow-style eye accents. See Photo 22.
- Embroider the eyebrows with dark brown yarn. Mark their positions with pins: the upper edge sits between Rounds 5–6 and the lower edge between Rounds 7–8. Make 3–4 stitches, then wrap those stitches with the threaded needle to build the eyebrow shape. See Photos 23–24.

- Embroider the nose with dark brown yarn as shown in Photo 25.
- Sew on the ears. Position the upper edge of each ear between Head Rounds 4–5 and the lower edge between Rounds 10–11. See Photo 26.
- With dark brown yarn, embroider the tiger stripes on the head as shown in Photos 27–28.
- Fold the collar in half, fit it around the neck, and sew the edges together. See Photo 29.
- Embroider the green Christmas tree on the sweater and decorate the top with a red bead. See Photo 30.
- Embroider dark brown stripes on the tail and lower legs in a varied arrangement as shown in Photos 31–32.


Copyright & Credits
The crochet pattern, design, and photos belong to Yulia Ladygina @ly_toys_. The written instructions and photos on this page may not be copied, republished, translated, or used for commercial purposes without permission. Please credit @ly_toys_ when sharing finished items.
Pick Your Favorite & Pin It



