This adorable amigurumi features a sleepy capybara riding a miniature blue scooter, creating a fun and distinctive design. The rounded tan body, broad brown muzzle, embroidered closed eyes, tiny ears, pale blue helmet, brown wheels, and black rear basket bring the character to life. This free crochet pattern captures the capybara’s relaxed expression, recognizable colors, and seated riding pose for a charming handmade creation.

Built Around the Rider and Scooter
The design brings together separately crocheted capybara pieces and carefully shaped scooter components, including the deck, wheels, fenders, front shield, handlebars, seat, headlight, and basket. Internal reinforcement helps the scooter maintain its shape, while the capybara is positioned securely on the seat, with its paws around the grips and legs angled forward. Embroidered muzzle details, a helmet badge and strap, and partially visible ears complete the character’s distinctive appearance.
Free Capybara Scooter Amigurumi Crochet Pattern
Difficulty Level: Intermediate to Advanced
Materials
• Sport weight (#2) cotton yarn — warm tan 100 g, medium brown 50 g, light blue 50 g, black 25 g, white 10 g
• Dark brown embroidery thread
• 2.5 mm crochet hook
• Polyester fiberfill
• 7-mesh plastic canvas, 1 sheet
• Aluminum armature wire — 1.5 mm: 60 cm / 24 in; 1.2 mm: 10 cm / 4 in
• Floral tape and strong polyester sewing thread
• Tapestry needle, stitch marker, pins, scissors, wire cutters, needle-nose pliers
Abbreviations
MR = magic ring
ch = chain
sc = single crochet
inc = 2 sc in the same stitch
dec = single crochet decrease
BLO = back loop only
st(s) = stitch(es)
FO = fasten off
Finished Size
Approximately 14–15 cm / 5.5–6 in tall with sport weight yarn and a 2.5 mm hook.
Notes
• Work circular pieces in continuous spiral rounds unless stated otherwise.
• Ch 1 at the beginning of a Row does not count as a stitch.
• Keep the fabric dense so stuffing and internal supports do not show.
• Fold each wire end back about 1 cm / 3/8 in and cover it completely with floral tape.
• Internal wire makes this a decorative display piece rather than a child-safe toy.
Capybara Body
With warm tan.
Round 1: 6 sc in MR. (6)
Round 2: inc around. (12)
Round 3: (sc, inc) × 6. (18)
Round 4: (2 sc, inc) × 6. (24)
Round 5: (3 sc, inc) × 6. (30)
Round 6: (4 sc, inc) × 6. (36)
Round 7: (5 sc, inc) × 6. (42)
Rounds 8–20: sc around. (42)
Round 21: (5 sc, dec) × 6. (36)
Rounds 22–23: sc around. (36)
Round 24: (4 sc, dec) × 6. (30)
Round 25: sc around. (30)
Round 26: (3 sc, dec) × 6. (24)
Round 27: (2 sc, dec) × 6. (18)
Stuff firmly.
Round 28: (sc, dec) × 6. (12)
Round 29: dec around. (6)
FO and close.
Capybara Head
With warm tan.
Round 1: 6 sc in MR. (6)
Round 2: inc around. (12)
Round 3: (sc, inc) × 6. (18)
Round 4: (2 sc, inc) × 6. (24)
Round 5: (3 sc, inc) × 6. (30)
Round 6: (4 sc, inc) × 6. (36)
Round 7: (5 sc, inc) × 6. (42)
Round 8: (6 sc, inc) × 6. (48)
Rounds 9–18: sc around. (48)
Round 19: (6 sc, dec) × 6. (42)
Round 20: sc around. (42)
Round 21: (5 sc, dec) × 6. (36)
Round 22: sc around. (36)
Round 23: (4 sc, dec) × 6. (30)
Round 24: (3 sc, dec) × 6. (24)
Stuff firmly, shaping a broad oval.
Round 25: (2 sc, dec) × 6. (18)
Round 26: (sc, dec) × 6. (12)
Round 27: dec around. (6)
FO and close.
Muzzle
With medium brown.
Ch 7.
Round 1: 2 sc in second ch from hook, sc in next 4 ch, 4 sc in last ch; working along the opposite side of the foundation chain, sc in next 4 ch, 2 sc in the remaining loop of the first ch. (16)
Round 2: inc in next 2 sts, sc in next 4 sts, inc in next 4 sts, sc in next 4 sts, inc in next 2 sts. (24)
Round 3: (sc, inc) × 2, sc in next 4 sts, (sc, inc) × 4, sc in next 4 sts, (sc, inc) × 2. (32)
Rounds 4–5: sc around. (32)
Lightly stuff. FO, leaving a long tail.
Sew horizontally over the lower front of the head, approximately across Head Rounds 11–17.
Embroider 2 short nostrils near the upper muzzle, a short vertical center line, and 2 rounded mouth curves with dark brown thread. Embroider a closed curved eye on each side approximately 1 Round above the muzzle.
Ears — Make 2
With medium brown.
Round 1: 6 sc in MR. (6)
FO, leaving a tail.
Flatten slightly. Sew to the upper sides of the head around Head Rounds 7–9 so each small ear remains partially visible beneath the helmet.
Arms — Make 2
Begin with medium brown.
Round 1: 6 sc in MR. (6)
Round 2: (sc, inc) × 3. (9)
Round 3: sc around. (9)
Change to warm tan.
Rounds 4–9: sc around. (9)
Round 10: (sc, dec) × 3. (6)
Lightly stuff the lower half. FO, leaving a long tail.
Legs — Make 2
Begin with medium brown.
Round 1: 6 sc in MR. (6)
Round 2: inc around. (12)
Round 3: sc around. (12)
Change to warm tan.
Rounds 4–8: sc around. (12)
Round 9: (4 sc, dec) × 2. (10)
Round 10: sc around. (10)
Lightly stuff. Flatten and work 5 sc through both layers.
FO, leaving a long tail.
Helmet
With light blue.
Round 1: 6 sc in MR. (6)
Round 2: inc around. (12)
Round 3: (sc, inc) × 6. (18)
Round 4: (2 sc, inc) × 6. (24)
Round 5: (3 sc, inc) × 6. (30)
Round 6: (4 sc, inc) × 6. (36)
Round 7: (5 sc, inc) × 6. (42)
Rounds 8–11: sc around. (42)
FO. Do not stuff.
Helmet Badge
With white.
Ch 3.
Round 1: 2 sc in second ch from hook, 4 sc in last ch, working along the opposite side, 2 sc in the remaining loop of the first ch. (8)
FO.
Sew horizontally to one side of the helmet.
Helmet Strap
With medium brown.
Ch 16. FO.
Sew the ends to the lower sides of the helmet, allowing the chain to curve loosely around the lower head.
Wheels — Make 2
With medium brown.
Round 1: 6 sc in MR. (6)
Round 2: inc around. (12)
Round 3: (sc, inc) × 6. (18)
Round 4: (2 sc, inc) × 6. (24)
Round 5: (3 sc, inc) × 6. (30)
Rounds 6–8: sc around. (30)
Cut one plastic-canvas circle for each wheel, slightly smaller than the crocheted face. Insert the circle and add a thin layer of stuffing behind it.
Round 9: (3 sc, dec) × 6. (24)
Round 10: (2 sc, dec) × 6. (18)
Round 11: (sc, dec) × 6. (12)
Round 12: dec around. (6)
FO and close.
Wheel Hubs — Make 2
With white.
Round 1: 6 sc in MR. (6)
Round 2: inc around. (12)
FO.
Sew one hub to the outer center of each wheel.
Hub Centers — Make 2
With light blue.
Round 1: 6 sc in MR. (6)
FO.
Sew over the center of each white hub.
Fenders — Make 2
With light blue.
Ch 18.
Row 1: Sc in second ch from hook and across. (17)
Rows 2–6: Ch 1, turn, sc across. (17)
FO, leaving a long tail.
Curve one strip over the upper half of each wheel during Assembly.
Scooter Deck — Make 2
With light blue.
Ch 17.
Round 1: 2 sc in second ch from hook, sc in next 14 ch, 4 sc in last ch; working along the opposite side, sc in next 14 ch, 2 sc in the remaining loop of the first ch. (36)
Round 2: inc in next 2 sts, sc in next 14 sts, inc in next 4 sts, sc in next 14 sts, inc in next 2 sts. (44)
Round 3: (sc, inc) × 2, sc in next 14 sts, (sc, inc) × 4, sc in next 14 sts, (sc, inc) × 2. (52)
FO.
Cut one plastic-canvas oval approximately 3–4 mm smaller than the panels.
Scooter Chassis
Cut 2 pieces of 1.5 mm wire, 30 cm / 12 in each.
Fold and wrap every end. Lay one wire along each long side of the plastic-canvas deck insert and secure with strong sewing thread.
Leave approximately 3 cm / 1.2 in extending beyond the rear of the deck; bend these ends downward beside the rear wheel position.
At the front, bend each wire forward past the deck and then upward approximately 6 cm / 2.4 in. Keep the 2 uprights parallel so they fit inside the Front Shield.
Place the wired canvas between the 2 Deck panels. Join the panels with 52 sc through both outer edges. FO.

Front Shield — Make 2
With light blue.
Ch 12.
Row 1: Sc in second ch from hook and across. (11)
Rows 2–4: Ch 1, turn, sc across. (11)
Row 5: Ch 1, turn, dec, sc in next 7 sts, dec. (9)
Rows 6–9: Ch 1, turn, sc across. (9)
Row 10: Ch 1, turn, dec, sc in next 5 sts, dec. (7)
Rows 11–14: Ch 1, turn, sc across. (7)
FO, leaving a long tail on one panel.
Handlebar
Begin with black.
Round 1: 6 sc in MR. (6)
Rounds 2–4: sc around. (6)
Change to light blue.
Rounds 5–24: sc around. (6)
Change to black.
Rounds 25–28: sc around. (6)
Fold both ends of the 10 cm / 4 in piece of 1.2 mm wire inward about 5 mm and wrap completely. Insert the wire.
Round 29: dec around. (3)
FO and close.
Headlight Housing
With light blue.
Round 1: 6 sc in MR. (6)
Round 2: inc around. (12)
Rounds 3–4: sc around. (12)
FO, leaving the front open.
Headlight Lens
With warm tan.
Round 1: 6 sc in MR. (6)
Round 2: inc around. (12)
FO.
Sew the lens to the open front of the Housing.
Seat — Make 2
With medium brown.
Ch 10.
Round 1: 2 sc in second ch from hook, sc in next 7 ch, 4 sc in last ch; working along the opposite side, sc in next 7 ch, 2 sc in the remaining loop of the first ch. (22)
Round 2: inc in next 2 sts, sc in next 7 sts, inc in next 4 sts, sc in next 7 sts, inc in next 2 sts. (30)
Round 3: (sc, inc) × 2, sc in next 7 sts, (sc, inc) × 4, sc in next 7 sts, (sc, inc) × 2. (38)
FO.
Place the panels together and work 38 sc through both layers, adding only a thin layer of stuffing before closing.
Rear Basket
With black.
Ch 11.
Row 1: Sc in second ch from hook and across. (10)
Rows 2–10: Ch 1, turn, sc across. (10)
Do not FO.
Round 1: Work 40 sc evenly around all 4 edges. (40)
Round 2: BLO sc around. (40)
Rounds 3–8: sc around. (40)
FO.
Cut a plastic-canvas base and 4 side panels to fit inside the basket. Sew the canvas into an open box and insert it as a liner.

Assembly
- Attach the lower back of the Head securely to the upper front of the Body. Sew the Arms around Body Rounds 19–23 and the Legs around Body Rounds 9–14, positioning all four limbs to angle forward.
- Position the Front Shield panels around the two upright chassis wires. Sew the side edges together and secure the bottom to the front of the Deck. Center the Handlebar across the top and use strong thread to anchor its middle firmly around both chassis wires. Sew the Headlight over the handlebar junction.
- Align the front and rear Wheels beneath their designated positions. Secure each wheel through its center to the adjacent hidden chassis or deck structure using several passes of strong thread. Position a Fender over each wheel and sew its ends firmly to the Deck or lower Front Shield, concealing the wheel attachment points.
- Place the Seat lengthwise over the rear half of the Deck. Add several attachment stitches around the hidden chassis wires to reinforce it. Sew the Basket directly behind the Seat, strengthening its lower front corners where they meet the Deck.
- Position the Capybara on the chassis and secure the lower Body to the Seat at several points, including at least two anchors around the internal chassis wires. Sew each paw around a black Handlebar grip, then tack the inner sides of the Legs to the Seat or Deck.
- Place the Helmet over the crown, leaving both small Ears partially visible. Sew the lower helmet edge to the Head at several concealed points, then position the Strap beneath the helmet. Check that the Wheels are aligned, the Handlebar and Headlight are centered, and the Basket remains square.
Copyright and Credits
This crochet pattern and all accompanying photographs belong to PenguinHobbies.com. The written instructions and photos may not be copied, redistributed, translated, republished, or used for commercial purposes without prior permission. Finished items made from this pattern may be sold in small quantities with credit to PenguinHobbies.com.m this pattern may be sold in small quantities with credit to crochetchristmasgifts.com.
Pick Your Favorite & Pin It
